Toshiba e-STUDIO211c/311c manual

10Reinstall the stapler unit in its previous position and turn the blue lever 90o to the right to latch the stapler unit.

11Confirm that the finisher is attached to the copier, and that the paper size is set to any size other than A5-R or B5-R.

-Test stapling cannot be performed when only A5-R or B5-R paper is available.

12Close the front cover of the finisher. Test stapling is then automatically performed on a blank sheet.

- This operation is performed to avoid empty stapling.

If test stapling fails to be performed and the following mes- sage remains displayed, repeat the above procedure from steps 1 to 12.

Set staple cartridge

Saddle Stitch Unit (MJ-1020 only)

1Open the lower cover of the finisher.

9

9-23