Toshiba e-STUDIO211c/311c manual Press the Next key

2. PROCEDURE OF SCAN SETTING (Cont.)

1Press the ENABLE key, then change the file format setting as required.

-Select a file format ( PDF , JPEG or TIFF ).

* When ‘Scan to E-mail’ and ‘Scan to FTP’ are set in combi- nation, the file formats of both become the same. If enther of them changes in setting, the another one changes cor- respondingly.

2If you want to send to the FTP server at the default setting, press the SET key.

3

8

4

-The setting is completed. Skip to step 7.

-The FTP server at the default setting is set by the administrator in advance. Page 8-26.

If you want to change any FTP server (or the FTP server is not set at the default setting), press the NEXT key.

Set the FTP server name.

- Press the area as shown on the screen on the

right to switch to the letter input screen. Enter the FTP server name within 128 letters using the alphabet (touch panel) and numbers (digital keys), then press the SET key.

You can enter the IP address directly instead of the FTP server name.

5Key in the FTP port number (0-65535).

6Key in the connection time (0-300 sec.) in ‘FTPTime Out’.

- Press the NEXT key.

8-16NETWORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTROLLER)