Toshiba e-STUDIO211c/311c manual Setting the Administrator Password

3. ABOUT THE SETTING BEFORE SCANNING (Cont.)

Setting the Administrator Password

The administrator sets the administrator password (5 digits). By this setting, the entry of the administrator password becomes necessary for setting after pressing the ADMIN key. Only the administrator can perform the setting with this key hereafter.

-The administrator password once set can be changed. In this case, the current administrator password is needed.

-We recommend you to take a memo in order not to forget the administrator password.

Setting the New Administrator Password

1Press the PRINTER/NETWORK key on the control panel, then press the SCAN SETTING key on the

touch panel.

2Press the PASSWORD SETTING key.

3Key in the new password (the same number in 5 digits) in both‘NEW PASSWORD’area and‘VERIFY’area,then

press the SET key.

8- The setting of the new administrator password is completed.

If the screen is not switched by pressing the SET key in this step, the number in ‘NEW PASSWORD’ area is different from the one in ‘VERIFY’ area. In this case, press the letter entry section in the ‘NEW PASSWORD’ area (or ‘VERIFY’ area) to make the letter entry available again.

8-30NETWORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTROLLER)