Toshiba e-STUDIO211c/311c manual Enter the distance values read for the area to be re- peated

5Enter the distance values read for the area to be re- peated.

-Key in the value for X1 with the digital keys and press the upper SET key.

-Similarly, set the values for X2, Y1 and Y2.

6 Press the lower SET key.

7Select the repeat number.

- To change the repeat number:

Press the 2 or 8 key to select the desired repeat number, and press the SET key.

5

- If the repeat number is not set, the copier automatically re- peats the original once. Only the height direction is available for repeat copying, and the original can be repeated up to 8 times.

-If the settings of the original and copy sizes are not made appropriately, the repeated image may not be copied com- pletely.

8 Place the original(s) on the glass face down and with its bottom toward you and with its top left aligned against the original scale on the left side.

Page 2-9

Select other copy modes as required.

9 Press the START key.

5-21