Toshiba e-STUDIO211c/311c manual ENERGY-SAVING Functions, Off-mode Base model

3. ENERGY-SAVING FUNCTIONS

Off-mode (Base model) 1

The power switch of the copier automatically shuts off when the copier is not being used for a specified period of time. The default setting is “OFF”, however, the period of time until the switch is turned OFF is selectable between 3 and 240 minutes on the “AUTO SHUTOFF” menu.

Setting the off-mode Page 6-34

Sleep mode (When the copier is used also as a printer)

This function allows the copier automatically to cut off the unnecessary electricity to the fuser unit when the copier is not being used for a specified period of time and to stand by with the minimum power consumption. The default setting is “OFF”, however, the period of time until the copier goes into the sleep mode is select- able between 3 and 240 minutes on the “AUTO SHUTOFF” menu.

Setting the off-mode Page 6-34

Energy saving mode (When the copier is used also as a printer)

This function allows the copier automatically to lower the fuser unit temperature to stand by with the mini- mum power consumption when the copier is not being used for a specified period of time. The default setting is “OFF”, however, the period of time until the copier goes into the energy-saving mode is selectable be- tween 3 and 60 minutes on the “ENERGY SAVE” menu.

Setting the energy saving mode Page 6-33

ENERGY SAVER time < AUTO SHUTOFF time

The copier goes into the energy saving mode, then the off-mode or sleep mode. ENERGY SAVER time AUTO SHUTOFF time

The setting of the off-mode or sleep mode takes precedence and the energy saving mode becomes invalid.

Power consumption and warm-up time at energy saving mode

Power consumption: Average power per hour

		Power Consumption			Efficiency
Mode				Warm-up time
		Without	With full		Without	With full
		option	options*1		option	options*1
Energy saving mode	Level 1	Approx.100W	Approx.135W	Approx. 2 min. 15 sec.	Approx. 57 %	Approx. 49 %
	Level 2	Approx.160W	Approx.195W	Approx. 1min. 15 sec.	Approx. 30 %	Approx. 26 %
Normal standby		Approx.230W	Approx.265W	0	0 %	0 %

*1 With full options: Reversing automatic document feeder, automatic duplexer, finisher, large-capacity feeder, hole punch unit , drawer modules

-Power consumption and warm-up time are the actual measurements made according to Toshiba’s method of measuring.

-The initial (default) setting of the energy saving mode is Level 1. You can switch the level depending on the user’s environment. User selection Page 6-17

1-11