Toshiba e-STUDIO211c/311c manual

- X1 Distance from the top left to the left edge of the specified area.

- X2 Distance from the top left to the right edge of the speci- fied area.

- Y1 Distance from the top left to the upper edge of the speci- fied area.

- Y2 Distance from the top left to the lower edge of the speci- fied area.

USING THE EDITING FUNCTIONS

Using the original scale on the left and the inner (top) scale, read the position of the desired area, as fol- lows:

4

Place an original on the glass to specify the area.

- Set the original face up with the bottom toward you, fit its top left corner against the top left corner of the glass, and align it with the original scale.

3

- If the key for the desired function is not shown, press the Next key to switch the screen.

- When using this mode in bypass copying ( be sure to specify the paper size.

Page 6-5),

Page 2-4

Place paper in the drawer(s).

1

2 Press the EDIT key to enter the editing menu, and press the IMAGE REPEAT key.

11. IMAGE REPEAT

You can repeat the entire original or a part of the area of the original on the copy.

* Image repeat is only possible with standard sized originals. However, a non-standard sized original can be copied if it is placed on a standard sized original and its area is specified.

Non-standard size

Standard size

5

5-20