2. REDUCTION AND ENLARGEMENT COPYING

Using Automatic Magnification Selection (AMS)

The built-in sensors automatically detect the size of the original(s) and calculate the reproduction ratio using the specified paper size.

*It is not possible for the device to perform Automatic Magnification Selection with highly transparent originals such as OHP films and tracing paper, wholly dark originals or originals with dark borders, or irregular sized originals such as newspapers and magazines. For these types of originals, use the

other reduction/enlargement modes.

Original sizes for which Automatic Magnificaton Selection (automatic detection) is availablePage 2-9

*Set the size for “the OTHER” key as required ( Page 6-16). When the set paper is a standard size

3other than A3, A4, B4 or A5, you will select the OTHER key on the screen of step 3 below. Before

pressing it, you need to make the OTHER key recognize the same size as the paper that have been set.

1Place paper in the drawer(s). Page 2-4

2 Press the desired drawer, then the ZOOM··· key.

-The copy paper size is selectable on the screen in step 3 as well.

3

Press the AMS key.

- OTHER key Page 6-16

4Place the original(s). Page 2-9

-The built-in sensors automatically detect the size of the original(s) and compute the reproduction ratio using the specified paper size.

-If the following messages are shown, proceed as directed:

Change direction of original

Use reduced-size cassette

Select other copy modes as required.

5 Press the START key.

3-4

SETTING OF BASIC COPY MODES

Page 49
Image 49
Toshiba e-STUDIO211c/311c manual Reduction and Enlargement Copying, Using Automatic Magnification Selection AMS