Toshiba e-STUDIO211c/311c manual ADD Paper Symbol, Adding Paper to the Drawers

2. ADD PAPER SYMBOL

Adding Paper to the Drawers

When the paper supply in the selected drawer or the large-capacity feeder (optional) runs out, the drawer or large-capacity feeder shown on the display flashes, and the following message appears:

Add paper

Add paper as follows.

1 While pulling up the drawer grip, draw out the drawer carefully until it comes to a stop.

2Place paper in the drawer.

-Maximum number of sheets that can be set Page 2-4

-Fan the paper well before placing it in the drawer.

-Do not add paper above the line indicated on the guide.

-Do not use creased, folded, wrinkled or damp sheets of paper.

Make sure that a gap of approx. 0.5 mm (less than 1 mm in total) is left between the paper and the side guide. If there is no gap, this would cause paper misfeeding.

3Push the drawer straight in until it comes to a stop.

- Be sure to push the drawer fully in.

Caution

Be careful not to let your fingers be caught when closing the drawer.

This could injure you.

Limit line

Side guide	Side guide
		9
0.5mm		0.5mm

9-3