Toshiba e-STUDIO211c/311c manual Specifying both Original Size and Copy Size

Specifying both Original Size and Copy Size

When the original size and copy size are specified, the reproduction ratio is automatically calculated to make copies.

* Set the size for “the OTHER” key as required ( Page 6-16). When the set originals or paper are standard sizes other than A3, A4, B4 or B5, you will select the OTHER key on the screen of step 4 below. Before pressing it, you need to make the OTHER key recognize the same size as the originals or paper that have been set.

1 Place paper in the drawer(s). Page 2-4 3

2Place the original(s). Page 2-9

3Press the desired drawer, then the ZOOM··· key.

-The copy paper size is selectable on the screen in step 4 as well.

4Press the ORIGINAL SIZE key of the same size as the original.

-Using the original size and copy size, the correct reproduc- tion ratio is computed and displayed on the screen.

-OTHER key Page 6-16

Select other copy modes as required.

5 Press the START key.

3-5