|
|
|
| E6581741 | |
EtherNet/IP parameters |
|
|
| ||
Title | Communi |
| Function | Description | Factory |
cation No. |
| setting | |||
|
|
|
| ||
|
|
|
| Monitor of the EtherNet error. | - |
|
|
|
| 0: No error/clear error |
|
c536 | C536 |
| EtherNet Error | 1: Modbus TCP IO Scanning timeout |
|
|
|
|
| 2: Network overload |
|
|
|
|
| 3: Loss of Ethernet carrier |
|
|
|
|
| Enables web server. | 1 |
c554 | C554 |
| Web service (*3) | 0: Disable |
|
|
|
|
| 1: Enable |
|
|
|
|
| Monitor the inverter status. | - |
c555 | C555 |
| Drive Status | 3: Gate Block |
|
| 4: Run |
| |||
|
|
|
|
| |
|
|
|
| 23: Fault |
|
Modbus TCP parameters |
|
|
| ||
Title | Communi |
| Function | Description | Factory |
cation No. |
| setting | |||
|
|
|
| ||
c600- | C600- |
| IP Master (*3) | The IP address for PLC(Master) of the Modbus TCP. | 0.0.0.0 |
c603 | C603 |
| |||
|
|
|
| ||
|
|
|
| Enables IO Scan function. | 0 |
c604 | C604 |
| IO Scan active (*3) | 0: |
|
|
|
|
| 1: Active |
|
(*3): This parameter is effective by reset. Please reset (power supply reset or f899=1) after changing a set point.
Mandatory
action
Warning
Set up “Communication error trip function (c100 to c103 and c523)” to stop the inverter when EtherNet/IP™ - Modbus® TCP communication is deactivated.
When the parameters are changed, please reset (power supply reset or f899=1) the inverter for the changes to take effect.
- 10 -
