Toshiba M40 user manual Parallel/Printer, Parallel Port Mode

HW SETUP AND PASSWORDS

User’s Manual

You will not be able to access the password option in the HW Setup. In this case you must turn the power off and back on to retry the procedure.

4.Follow the same procedures described in the earlier section, How to set the password, to set a new user password.

Parallel/Printer

This tab lets you set the Printer Port Type. Use the Windows Device Manager to make settings for the Parallel port.

Parallel Port Mode

The options in this tab are ECP and Standard Bi-directional.

ECP Sets the port type to Extended Capabilities Port (ECP). For most printers, the port should be set to ECP. (Default)

Standard This setting should be used with some other parallel Bi-directionaldevices.

Display

This tab lets you customize your computer’s display settings for either the inter- nal LCD screen or for an external monitor.

Power On Display

Lets you set the display to be used when the computer is booted. Auto-SelectedSelects an external monitor if one is connected. Other-

wise, it selects the internal LCD. (Default) LCD+AnalogRGB Selects both the internal LCD and external monitor for

simultaneous display.

7-4