Toshiba M40 user manual Writing CD/DVDs on DVD Super Multi drive supporting DVD+R DL

Writing CD/DVDs on DVD Super Multi drive supporting DVD+R DL

❑Do not enter standby/hibernation mode while using WinDVD Creator.

❑Do not operate WinDVD Creator immediately after turning on the com- puter. Please wait until all Disc Drive activity has stopped.

❑When recording to a DV-Camcorder, to ensure you capture all of your data, let the camcorder record for a few seconds before you begin record- ing your actual data.

❑CD recorder, JPEG functions, DVD-Audio, miniDVD, and Video CD functions are not supported in this version.

❑While recording video to DVD or tape, please close all other programs.

❑Do not run software like a screen saver because it can put a heavy load on the CPU.

❑Do not run communication applications like a modem or a LAN.

2.Before recording the video to DVD.

❑When you record to DVD disc, please use only discs recommended by the Drive manufacturer.

❑Do not set the working drive to a slow device like a USB 1.1 hard disk drive or it will fail to write DVD.

❑Do not perform any of the following actions:

•Operate the computer for any other function, including using a mouse or TouchPad or closing/opening the LCD panel.

•Bump or cause vibration to the computer.

•Use the Mode control button and Audio/Video control button to repro- duce music or voice.

•Open the DVD drive.

•Install, remove or connect external devices, including the following: PC card, SD card/Multi Media Card/Memory Stick, USB devices, external display, i.LINK devices, optical digital devices.

❑Please verify your disc after recording important data.

❑DVD-R/+R/-RW disc cannot be written in VR format.

❑A maximum of about 2 hours of video data can be written in DVD Video format to DVD-R/+R/-RW/+RW disc.

❑WinDVD Creator cannot export to DVD-Audio, VideoCD, miniDVD for- mat.

❑WinDVD Creator can write DVD-RAM/+RW in VR format, but the disc may only play on your computer.

OPERATING BASICS

4-25