Toshiba M40 VnProtocol result code, BView numbers in blacklist, CnData compression control

APPENDIX C

User’s Manual

\VnProtocol result code

\V0 Disable protocol result code appended to DCE speed.

\V1 Enable protocol result code appended to DCE speed (default). Result Codes:

OK n=0,1 ERROR Otherwise

%BView numbers in blacklist

If blacklisting is in effect, this command displays the numbers for which the last call attempted in the past two hours failed. The ERROR result code appears in regions that do not require blacklisting.

%CnData compression control

This command determines the operation of V.42bis and MNP class 5 data compression. On-line changes do not take effect until a disconnect occurs first.

%C0 V.42bis/MNP 5 disabled. No data compression.

%C3 V.42bis/MNP 5 enabled. Data compression enabled (default). Result Codes:

OK n=0,3 ERROR Otherwise

C-12