
OPERATING BASICS
User’s Manual
◆Data deleted (erased) from a
◆In writing to a
◆Since the disc is based on the DVD standard, it will be filled with dummy data if the written data is less than about 1 GB. Even if you write only a small amount of data, it might take time to fill in the dummy data.
◆
◆When multiple drives that can write data to discs are connected, be careful not to write to the wrong drive.
◆Be sure to connect the universal AC adaptor before you write or rewrite.
◆Before you enter standby/hibernation mode, be sure to finish
◆Be sure to close all other software programs except the writing software.
◆Do not run software such as a screen saver, which can put a heavy load on the CPU.
◆Operate the computer in the
◆Do not write while virus check software is running. Wait for it to finish, and then disable virus detection programs including any software that checks files automatically in the background.
◆Do not use hard disk utilities, including those intended to enhance HDD access speed. They may cause unstable operation and data damage.
◆Write from the computer’s HDD to the CD/DVD. Do not try to write from shared devices such as a LAN server or any other network device.
◆Writing with software other than RecordNow! is not recommended.
When writing or rewriting
Please observe/consider the following when you write or rewrite to a
◆Do not perform any of the following actions:
◆ Change users in the Windows XP operating system.