4.7 Removable HDD | 4 Replacement Procedures |
Reassembling the Removable HDD
To reassemble the removable HDD, follow the steps below and refer to the figure in the preceding section.
1.Attach the HDD connector to the HDD.
2.Wrap the HDD in the aluminum HDD shielding ensuring that the circuit board face of the drive is covered by the black part of the shielding. The circuit board must not come into contact with the silver portion of the shielding.
3.Seat the HDD in the HDD case and secure with four M3⋅3 screws.
4.Slide the HDD into the HDD container.
5.Close the HDD container lid and lock it with the latch.
Satellite |
