4 Replacement Procedures | 4.18 TouchPad |
4.18 TouchPad
Removing the TouchPad
To remove the TouchPad, first remove the battery pack, then follow the steps below.
1.Remove the keyboard, HDD, main module and top cover.
2.Place the top cover face down.
3.Disconnect the TouchPad board FPC cable from both the TouchPad button board and the TouchPad.
4.Remove five M2.5⋅3 silver screws securing the TouchPad cover.
5.Lift out the TouchPad cover followed by the TouchPad.
6.If you need to replace the TouchPad button board, remove two M2.5⋅3 silver screws securing it, then lift it out.
Fig 4-28: Removing the TouchPad button board
Satellite |
