Toshiba RAS-10YAV-E, RAS-13YKV-E, RAS-10YKV-E, RAS-13YAV-E service manual Outdoor Unit

11-3. Outdoor Unit

No. Part name		Procedure	Remarks
Q Common	1. Detachment		Upper cabinet
procedure	1)	Stop operation of the air conditioner, and remove
		the power plug of the indoor unit from plug
		socket.	Wiring
	2)	Remove the valve cover. (ST1TØ4 x 10 l 1 pc.)	cover
		• After removing screw, remove the valve cover	Valve
		pulling it downward.	cover
	3)	Remove wiring cover (ST1TØ4 x 10 l 2 pcs.),
		and then remove connecting cable.

4)Remove the upper cabinet. (ST1TØ4 x 10 l 2 pcs.)

•After removing screws, remove the upper cabinet pulling it upward.

2. Attachment

1)Attach the upper cabinet. (ST1TØ4 x 10 l 2 pcs.)

• Hook the rear side of the upper cabinet to claw

of the rear cabinet, and then put it on the front cabinet.

2) Perform cabling of connecting cable, and attach the wiring cover.

• Insert the upper part into the upper cabinet, insert claw which has been hooked to the lower part into the square hole, and then fix it with screw. (ST1TØ4 x 10 l 1 pc.)

3)Attach the valve cover. (ST1TØ4 x 10 l 1 pc.)

• Insert the upper part to the upper cabinet, set

hook claw of the valve cover to square holes (at three positions) of the main unit, and attach it pushing upward.

R Front cabinet 1. Detachment
1)	Perform work of item 1 of Q.
2)	Remove screws (ST1TØ4 x 10 l 1 pc.) of the
	front cabinet and inverter cover and screws
	(ST1TØ4 x 10 l 3 pcs.) of the front cabinet and
	lower part.
	• The left side of the front is made to insert to
	the rear cabinet, so remove it pulling upward.
2. Attachment		Claw
1)	Insert claw at the left side of the front into the
		Square hole
	rear cabinet.
2)	Hook the lower part at the right side of the front
	to concave part of the bottom plate. Insert claw
	of the rear cabinet into square hole of the front
	cabinet.
3)	Attach the removed screws to the original	Concave section
	positions.

– 62 –