No. Part name |
|
| Procedure | Remarks | |||
|
|
|
|
|
|
| |
‰ Pulse | 1. Detachment |
|
|
| |||
modulating | 1) Perform work of item 1 of •, and ‚, ƒ, …. |
|
|
| |||
valve coil | 2) | Turn the coil clockwise (counterclockwise) by 90 |
|
|
| ||
|
| degrees, and remove coil from the pulse modu- |
|
|
| ||
|
| lating valve. |
|
|
| ||
| 2. Attachment |
|
| ||||
| 1) | Set |
|
| |||
| of lead wire |
|
| ||||
|
| coil inserting position of the pulse modulating | Notch |
|
| ||
|
| valve, and attach the coil. |
| Coil fix | |||
|
| Coil inserting |
| ||||
| 2) | Turn the coil by 90 degrees, set surely the |
| position | |||
| position |
| |||||
|
| concave part at lower part of the coil to the |
|
|
| ||
|
| positioning hole of the pulse modulating valve, |
|
|
| ||
|
| and then fix the coil. |
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| The pulse modulating valve has A room |
| Coil inserting |
|
|
|
|
| side and B room side. After mounting it, |
|
| Positioning | |
|
|
| check that coil at B room side (Red |
| position |
| hole |
|
|
| marking is marked on the pulse modulat- |
|
|
|
|
|
|
| ing valve.) is connected to CN13 of the |
|
|
|
|
|
|
| control board assembly. |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
Š Fan guard | 1. Detachment |
|
|
| |||
1)Perform work of item 1 of •, and ‚.
2)Remove the front cabinet, and put it down so that fan guard side directs downward.
Perform work on a corrugated cardboard, | Minus screwdriver | |
Hooking claw | ||
cloth, etc. to prevent flaw to the product. | ||
|
3)Remove the hooking claws by pushing minus screwdriver according to the arrow mark in the right figure, and remove the fan guard.
2. Attachment
1)Insert claw of the fan guard in the hole of the front cabinet. Push the hooking claws (10 positions) by hands and fix the claws.
All the attaching works have completed. Check that all the hooking claws are fixed to the specified positions.
