Toshiba RAS-B13GKVP-E, RAS-B16GKVP-E FILTER Indicator, How to Cancel the Auto Restart Function

9-3-2. How to Cancel the Auto Restart Function

To cancel auto restart function, proceed as follows :

Repeat the setting procedure : the unit receives the signal and beeps three times.

The unit will be required to be turned on with the remote controller after the main power supply is turned off.

• When the system is on stand-by (not operating)

Operation			Motions
Press [RESET] button for more than	The unit is on standby.
three seconds. (Less than 10 seconds)	↓
	The unit starts to operate.		The green indicator is on.
	↓	After approx. three seconds,
	The unit beeps three times and continues to operate.
	If the unit is not required to operate at this time, press [RESET]
	button once more or use the remote controller to turn it off.

• When the system is operating

Operation			Motions
Press [RESET] button for more than	The unit is in operation.		The green indicator is on.
three seconds. (Less than 10 seconds)	↓
	The unit stops operating.		The green indicator is turned off.
	↓	After approx. three seconds,
	The unit beeps three times.
	If the unit is required to operate at this time, press [RESET] button
	once more or use the remote controller to turn it on.

9-3-3. Power Failure During Timer Operation

When the unit is turned off because of power failure during timer operation, the timer operation is can- celled. In that case, set the timer operation again.

NOTE :

The Everyday Timer is reset while a command signal can be received from the remote controller even if it stopped due to a power failure.

9-4. FILTER Indicator

When the elapsed time reaches 1000 hours after air purifier operation, the FILTER indicator lights.

After cleaning the filters, turn off the FILTER indicator.

9-4-1. How to Turn Off FILTER Indicator

Press [RESET] button on the indoor unit.

NOTE :

If [RESET] button is pushed while the FILTER indica- tor is not lit, the indoor unit will start the automatic operation.

When you want a temporary operation while the FILTER lamp lights, press [RESET] button to turn off the FILTER lamp. (See page 36)

– 43 –