Toshiba RAS-10GAVP-E, RAS-B16GKVP-E, RAS-B13GKVP-E Remove the front panel fixing screws. 2 pcs

No.	Part name	Procedures	Remarks
•	Front panel	4) Press “ ” part under the front panel
		and remove hooks of the front panel from
		the installation plate.

Pull here

Installation plate

Press here

Press here

Front panel

Press

5)Remove the front panel fixing screws. (2 pcs.)

6)Press the electric parts box with the right thumb while pulling the both sides of the front panel toward you.

<How to assemble the front panel>

Electric dust	Electric dust
collector	collector
Holder	Holder

Protrusion

Protrusion

1)Press three center positions and two lower center positions of the air outlet, and then hang the hanging hooks (4 pcs.) at the top side of the front panel to the rear plate.

2)Insert the electric dust collector and left and right air filters.

Press in the electric dust collector until the protrusions on both sides are completely inserted into the holders.

If installation is incomplete, the FILTER indicator (orange) may light.

3)Tighten two screws.

•Incomplete hanging or incomplete pressing may cause a dewdrops or generation of a fluttering sound.

– 83 –