No.

Part name

 

Procedure

Remarks

ƒ

Inverter

1)

Perform work of item 1 in •.

Inverter cover

 

assembly

2)

Remove screw (ST1TØ4 × 8L 2 pcs.) of the

 

 

P. C. board

 

 

 

upper part of the front cabinet.

 

 

 

(Soldered surface)

 

 

 

 

• If removing the inverter cover in this condition, P.C. board can be checked.

• If there is no space above the unit, perform work of 1 in ‚.

Be careful to check the inverter because high-voltage circuit is incorporated in it.

3) Perform discharging by connecting ,

Discharging position

Plug of

soldering

polarity by discharging resistance (approx.

(Discharging period

iron

10 seconds or more)

100Ω 40W) or plug of soldering iron to ,

 

 

 

terminals a of the C14 (printed “CAUTION

 

 

HIGH VOLTAGE” is attached.) electrolytic

 

 

capacitor (760µF) on P.C. board.

 

 

Be careful to discharge the capacitor

 

 

because the electrolytic capacitor

 

 

cannot naturally discharge and voltage

 

 

remains according to trouble type in

A screw

 

some cases.

Terminal block

(STIT-4X8MSZN)

NOTE

This capacitor is one with mass capacity. Therefore, it is dangerous that a large spark generates if short-circuiting between , polarity with screwdriver, etc. for discharging.

4)

Remove screw (ST1TØ4 × 8L 2 pcs.) fixing

 

 

 

the main body and the inverter box.

Put the compressor

Put each leads

5) Remove the front cabinet by performing step

leads through

through the hole

the hole

 

 

1 in ‚, and remove the fixing screws

 

 

 

 

 

(ST1TØ4 × 8L) for securing the main body

 

 

 

and inverter box.

The connector is one

 

6)

Remove various lead wires from the holder

with lock, so remove

 

 

at upper part of the inverter box.

it while pushing the

 

 

part indicated by an

 

7)

Pull the inverter box upward.

 

arrow.

 

 

 

 

8) Disconnect connectors of various lead wires.

Requirement

As each connector has a lock mecha- nism, avoid to remove the connector by holding the lead wire, but by holding the connector.

Be sure to remove the connector by holding the connector, not by pulling the lead wire.

– 93 –

Page 92 Page 94
Page 93
Image 93
Toshiba RAS-13GAVP-E, RAS-B16GKVP-E, RAS-B13GKVP-E, RAS-B10GKVP-E, RAS-16GAVP-E, RAS-10GAVP-E service manual Some cases
Page 92 Page 94

RAS-10GAVP-E, RAS-16GAVP-E, RAS-13GAVP-E, RAS-B10GKVP-E, RAS-B13GKVP-E specifications

Toshiba has long been a renowned name in the world of air conditioning, delivering reliable and energy-efficient solutions that meet the demands of modern living. Among their innovative product line, the Toshiba RAS-B13GKVP-E, RAS-10GAVP-E, RAS-B10GKVP-E, RAS-16GKVP-E, and RAS-13GAVP-E stand out for their advanced features and cutting-edge technologies.

The RAS-B13GKVP-E is a powerful air conditioning unit designed for medium-sized rooms. It boasts a robust cooling capacity, ensuring comfort even during the hottest days. One of its standout features is the inverter technology, which optimizes energy consumption by adjusting the compressor speed according to the temperature, resulting in significant energy savings.

Next, the RAS-10GAVP-E is tailored for smaller spaces, offering efficient cooling and heating capabilities. It comes with an easy-to-use remote control and a user-friendly interface, allowing for effortless operation. The model also incorporates a quiet operation feature, making it suitable for bedrooms and study areas where noise can be a distraction.

The RAS-B10GKVP-E strikes a balance between size and efficiency, ideal for compact living spaces. Its dual cooling and heating function ensures year-round climate control. This model further enhances indoor air quality with its built-in filters, which capture dust and allergens, creating a healthier environment for occupants.

For larger areas, the RAS-16GKVP-E provides an impressive cooling capacity combined with turbo mode functionality. This feature enables rapid cooling of spaces during sweltering summer days. Its sleek design and compact form factor allow for easy installation, making this unit a popular choice for both residential and commercial applications.

Lastly, the RAS-13GAVP-E excels in energy efficiency with its eco-friendly refrigerant options. It is equipped with a smart control system that allows users to monitor and adjust settings remotely, adding convenience and flexibility to its operation. This model is particularly beneficial for users looking to minimize their carbon footprint while enjoying the comfort of climate control.

Overall, Toshiba's lineup of air conditioning units, including RAS-B13GKVP-E, RAS-10GAVP-E, RAS-B10GKVP-E, RAS-16GKVP-E, and RAS-13GAVP-E, promises high performance, energy efficiency, and advanced technology. These features affirm Toshiba's commitment to creating a comfortable indoor environment while ensuring sustainability and user satisfaction.
Top Page Image Contents