Toshiba RAS-B13GKVP-E, RAS-B16GKVP-E, RAS-B10GKVP-E, RAS-13GAVP-E, RAS-16GAVP-E Outdoor Unit

12-3. Outdoor Unit

No. Part name Procedure Remarks

•Common 1. Detachment procedure

NOTE	Upper cabinet
Wear gloves for this job.	Water
Otherwise, you may injure your	proof
hands on the parts, etc.	cover

1) Stop operation of the air conditioner, and turn off the main switch of the breaker for air conditioner.

2) Remove the valve cover.

(ST1TØ4 × 8L 1 pc.)

• After removing screw, remove the valve cover pulling it downward.

3) Remove wiring cover (ST1TØ4 × 8L
2 pcs.), and then remove connecting
cable.	Valve cover

4)Remove the upper cabinet. (ST1TØ4 × 8L 5 pcs.)

•After removing screws, remove the upper cabinet pulling it upward.

2.Attachment

1)Attach the water-proof cover.

	NOTE	Insert the bent part	Bring into contact
		into the rear panel
The water-proof cover must be		of the inverter	against these parts
attached without fail in order to
prevent rain water, etc. from entering
inside the indoor unit.

2) Attach the upper cabinet.
(ST1TØ4 × 8L 5 pcs.)
3) Perform cabling of connecting cable,
and attach the wiring cover.	Align the stitch line	Bend downward, and align
• Place the wiring cover over the
	with the top edge	with the inside surface
opening used to work on the con-	of the front cabinet	of the front cabinet
necting wires of the side cabinet,
	How to mount the water-proof cover
and secure it using the two fixing
screws (ST1TØ4 × 8L 2 pcs.).
At this point, the top cushion of the
wiring cover must be on the inside of
the opening.
4) Attach the valve cover.
(ST1TØ4 × 8L 1 pc.)
• Insert the upper part into the square
hole of the side cabinet, set hook
claws of the valve cover to square
holes (at three positions) of the main
unit, and attach it pushing upward.

– 91 –