Toshiba RAS-B10GKVP-E, RAS-B16GKVP-E, RAS-B13GKVP-E, RAS-13GAVP-E, RAS-16GAVP-E, RAS-10GAVP-E

No.	Part name	Procedure	Remarks
‚	Front cabinet	1. Detachment

1) Perform step 1 in •.

2) Remove the fixing screws (ST1TØ4 × 8L

2 pcs.) used to secure the front cabinet and inverter cover, the screws (ST1TØ4 × 8L 3 pcs.) used to secure the front cabinet at the bottom, and the fixing screws (ST1TØ4 × 8L 2 pcs.) used to secure the motor base.

• The front cabinet is fitted into the side
cabinet (left) at the front left side so
pull up the top of the front cabinet to	Front cabinet
remove it.

2.Attachment

1)Insert the claw on the front left side into the side cabinet (left).

2) Hook the bottom part of the front right
side onto the concave section of the
bottom plate. Insert the claw of the side
cabinet (right) into the square hole in the
front cabinet.	Claw
3) Return the screws that were removed
	Square
above to their original positions, and
attach them.the main unit, and attach it	hole
pushing upward.

Concave section

– 92 –