Toshiba RAS-16GAVP-E Appendix-7, Photo / Explanatory diagram, Procedure, insulation tape

Appendix

No. Photo / Explanatory diagram Procedure

Rework the side cabinet (L) to remove part of it.

Side cabinet (L)

The area to be removed is indicated by the shaded lines in the left figure.

After removing part of the side cabinet (L), deburr the edges of the side cabinet (L).

2-4

Delete

Perform end process and bundling of each cable.

Using fixing screws (Self-tapping screw type-B Ø3.5

Close-end connector

Thermostat

× 6mm), fix the thermostat to the thermostat fixing

plate.

insulation tape

Power cord

Perform end process for various lead cables and

connect them according to the wiring diagram.

Attach #250 Faston and UL-approved sleeves each

to the end of lead cables which are connected to the

2-5

thermostat.

Using insulation tape, apply protective measures to

Cord heater

Thermostat

*

Transparent

the connected parts by the close-end connectors.

fixing plate

Using P-shape clamp and the screws (Self-tapping

L side

screw type-B Ø4 × 8mm), fix the power cord to the

P-shape clamp

thermostat fixing plate.

Fuse

Fuse holder

When the power cord size does not match with P-

shape clamp, procure the most appropriate one at

the local site.

Appendix-7