Toshiba RAS-B13GKVP-E Drain pan above the claws and at, How to assemble the electric parts box

No.	Part name		Procedures	Remarks
ƒ	Electric parts 1) Follow the procedure up to 4) in ‚ above.
	box assembly	2)	Remove screw of earth lead attached to the
			end plate of the evaporator.
		3)	Remove the lead wire cover, and remove
			connector (5P) for the fan motor and connec-
			tor (5P) for the louver motor from the electric
			parts box assembly.
		4)	Pull out TC sensor from sensor holder of the
			evaporator.

TC sensor

Fan motor connector

Louver moter connector

Screw

Fixing screw

5)Disengage the two claws at the top of the display unit.

(They can be easily disengaged by pressing
				Press the
the drain pan above the claws and at the			drain pan
same time pulling the display unit toward you.)
6) Remove the fixing screw that secures the
electric parts box assembly, and remove the
assembly.
		Pull the display
	unit toward you

<How to assemble the electric parts box>

1)Hook the top part of the electric parts box assembly onto the claws on the back body, and secure it using the fixing screw.

Now attach the display unit. Connect the connectors for the fan motor and louver motor.

2)Secure the grounding wire using the fixing screw. Insert the TC sensor into the sensor holder.

*Be absolutely sure to loop the grounding wire and TC sensor leads once at the bottom.

– 85 –