Toshiba RAS-10GAVP-E Operation flow and applicable data, etc, Description, Cooling operation

Item	Operation flow and applicable data, etc.	Description
10. ECO	When pressing [ECO] button on the remote controller, a quiet
operation	and mild operation is performed by reducing the fan speed and
	the compressor speed.
	<Cooling operation>	<Cooling operation>
	This function operates the air conditioner with the difference	1) The room temperature (Tao) at
	between the set and the room temperature as shown in the	the start time of DRY operation is
	following figure.	detected.

	The time correction is performed for 8 minutes each.				2) According to difference between
	(However, the first correction is performed 150 seconds after				the room temperature and the
	start of the operation.)				set temperature (Tsc), the
					operation starts with the condi-
	Zone	Frequency	Fan	Time correction	tions shown in the left figure.
TA					Set temp.
	12	DRY max	L+ (W7)		(Tsc) = Set temp. on remote
[˚C]
	11	*12			controller (Ts) + (0.0 to 1.0)
+4.0
	10	*11
+3.5					3) If the room temperature is down
	9	*10		+ 1
+3.0			L (W6)		by 2°C or more, turn off the
	8	*9
+2.5					compressor.
	7	*8
+2.0
	6	COOL min
+1.5
	5		L– (W5)
+1.0
	4			± 0
+0.5
	3
TSC
	2
–0.5
	1
–1.0			UL (W4)	–1 zone: min 1
–2.0	0	OFF
	* 12 (DRY max - COOL min) /6 x 5 + COOL min
	* 11 (DRY max - COOL min) /6 x 4 + COOL min
	* 10 (DRY max - COOL min) /6 x 3 + COOL min
	* 9 (DRY max - COOL min) /6 x 2 + COOL min
	* 8 (DRY max - COOL min) /6 x 1 + COOL min

		<Heating operation>				<Heating operation>
						1) The indoor fan speed is con-
		30 minutes		→ Time	Compressor	trolled within (W7) as maximum
						value.
					speed	2) Setting the compressor speed to
	0				0Hz
		A				Max. 52Hz, the temperature zone
	–0.5
						in which the operation can be
	–1.0
						performed with Max. 16Hz is
temp.)	–1.5	B
			A		16Hz	gradually widened after 30
	–2.5
	–2.0				A zone	minutes passed when starting
– Set	–3.0					ECO operation.
						3) The louver position is set
	–4.0
temp.	–5.0					horizontally (Standard cooling
	–6.0					position) when the room tem-
(Room	–7.0				16 to 52Hz	perature comes close to the set
	–9.0					passed after starting ECO
	–8.0	C	B		B zone	temperature or when 25 minutes
	–10.0					operation.
	–11.0
			C		C zone
					52Hz

– 35 –