Toshiba RAS-10GAVP-E, RAS-B16GKVP-E Detail A, Detail B, Detail C, Propeller fan, Fan motor

No. Part name Procedure Remarks

…Side cabinet 1. Side cabinet (right)

1) Perform step 1 in ‚ and all the steps in

ƒ.

2) Remove the fixing screw (ST1TØ4 × 8L

5 pcs.) used for securing the side cabinet to the bottom plate and valve fixing panel.

2. Side cabinet (left)
1)	Perform step 1 in ‚.	Hook the claw onto
2)	Remove the fixing screw (ST1TØ4 × 8L
		the bottom plate here.
	1 pcs.) used to secure the side cabinet	A
	(left) onto the heat exchanger.
3)	Remove the fixing screw (ST1TØ4 × 8L
	2 pc.) used for securing the side cabinet
	to the bottom plate and heat exchanger.

B

C

The back body section is hooked onto the bottom plate here.

Detail A Detail B Detail C

† Fan motor	1)	Perform work of item 1 of • and ‚.
	2)	Remove the flange nut fixing the fan motor
		and the propeller.
		• Flange nut is loosened by turning clock-	Propeller fan
		wise. (To tighten the flange nut, turn
		counterclockwise.)	Fan motor
	3)	Remove the propeller fan.
	4)	Disconnect the connector for fan motor
		from the inverter.
	5)	Remove the fixing screws (2 pc.) holding
		by hands so that the fan motor does not
		fall.
		* Precautions when assembling the fan	Flange nut
		motor
		Tighten the flange nut using a tightening
		torque of 4.9 N•m.

– 95 –