Setting | Function |
|
|
OSD Hotkey | Selects which Hotkey controls the OSD function: [Scroll Lock] |
| [Scroll Lock] or [Ctrl] [Ctrl]. Since the Ctrl key combination may |
| conflict with programs running on the computers, the default is the |
| Scroll Lock combination. |
|
|
ID Display | Selects how the Port ID is displayed: the Port Number alone (PORT |
| NUMBER); the Port Name alone (PORT NAME); or the Port Number |
| plus the Port Name (PORT NUMBER + PORT NAME). The default is |
| PORT NUMBER + PORT NAME. |
|
|
ID Duration | Determines how long a Port ID displays on the monitor after a port |
| change has taken place. You can choose an amount from 0 - 255 |
| seconds. The default is 5 Seconds. 0 is Always On. |
|
|
Scan Select | Selects which computers will be accessed under Auto Scan Mode |
| (see Auto Scanning, page 94). Choices are: ALL - All the Ports which |
| have been set Accessible (see Port Access, page 54); POWERED |
| ON - Only those Ports which have been set Accessible and are |
| Powered On; QUICK VIEW - Only those Ports which have been set |
| Accessible and have been selected as Quick View Ports (see Quick |
| View Ports, page 43); QUICK VIEW + POWERED ON - Only those |
| Ports which have been set Accessible and have been selected as |
| Quick View Ports and are Powered On. The default is ALL. |
|
|
Scan Duration | Determines how long the focus dwells on each port as it cycles |
| through the selected ports in Auto Scan Mode (see Auto Scanning, |
| page 94). Key in a value from 0 - 255 seconds. The default is 10 |
| seconds; a setting of 0 disables the Scan function. |
|
|
Screen Blanker | If there is no input from the console for the amount of time set with |
| this function, the screen is blanked. Key in a value from 1 - 30 |
| minutes. A setting of 0 disables this function. The default is 0 |
| (disabled). |
|
|
Logout Timeout | If there is no Operator input for the amount of time set with this |
| function, the Operator is automatically logged out. A login is |
| necessary before the |
| a value from 0 - 180 minutes. The default is 30 minutes. 0 disables |
| the function. |
|
|
Beeper | When set to ON, the beeper sounds whenever the port is switched, |
| when activating the Auto Scan function (see Auto Scanning, |
| page 94), or when an invalid entry is made on an OSD menu. The |
| default is ON. |
|
|
Change | Allows a user to change the account password. After clicking the |
Password | Change Password button, a dialog box appears. Enter the old |
| password. Then, enter a new password and confirm it by entering it |
| again. Press OK to save changes, or press Cancel to discard |
| changes. |
|
|
50
