Tripp Lite B020-008-17-IP user manual Windows Client Port Operation, Activating the OSD

Chapter 6

Windows Client Port Operation

Activating the OSD

After you have successfully logged in (see page 71), to activate the browser- based Windows Client OSD do the following:

1.Click the Windows Client button (the one without the arrow) at the left of the Webpage.

Note: 1. You must have DirectX 7.0 or higher installed on your computer. If not, the Windows Client will not load. If you don't already have it, DirectX is available for free download from Microsoft's Website: http://www.microsoft.com/downloads.

2.The Windows Client button with the arrow is for running the AP version of the Windows Client (see page 119 for details).

2.When the file download security warning dialog box appears, click Run.

3.If a second security warning dialog box appears, click Run again.

Note: 1. If the browser cannot run the file, save it to disk, instead. Then, with your browser still open to the B020-008-17-IP Webpage, run the file from your disk.

2.If you use the save to disk method, for security purposes, you cannot simply run a previously downloaded version of the program. Each time you want to access the B020-008-17-IP, you must log in to the Webpage with a valid username and password to download a fresh copy of the program.

(Continues on next page.)

77