Tripp Lite B020-008-17-IP user manual OSD Hotkey Summary Table, OSD Toolbar Icons, When Do This

B020-008-17-IP User Manual

OSD Hotkey Summary Table

The following table presents a summary of the OSD Hotkey actions. See p. 50 to set the OSD Hotkey.

To...	When...	Do This...
Open the OSD	The OSD Toolbar is not open.	Click the OSD Hotkey twice.
Toolbar.
Open the OSD.	The OSD Toolbar is open.	Click the OSD Hotkey once.
Open the OSD.	The OSD Toolbar is not open.	Click the OSD Hotkey three times.

OSD Toolbar Icons

The meanings of the toolbar icons are explained in the table below.

Click to skip to the first accessible port on the entire installation without having to invoke the OSD.

Click to skip to the first accessible port previous to the current one without having to invoke the OSD.

Click to begin Auto Scan Mode. The B020-008-17-IP automatically switches among the ports that were selected for Auto Scanning under the Configuration Scan Select function (see page 50). This allows you to monitor their activity without having to switch among them manually.

Click to skip from the current port to the next accessible one without having to invoke the OSD.

Click to skip from the current port to the last accessible port on the entire installation without having to invoke the OSD.

Click to bring up the OSD.

Transparency: Makes the OSD semi transparent, allowing the background to show through. Clicking again, returns the OSD to normal.

Note: 1. We recommend setting your monitor refresh rate to a value greater than 75Hz before using this feature.

2.If you switch to a null port when Transparency is enabled, the fea- ture becomes disabled.

Click to close the toolbar.

Click to logout and exit the Windows Client application.

92