VTech DS6221-4, DS221-2, DS221-3, DS6221-5, DS6222-4 Telephone base and charger installation

Getting started

Telephone base and charger installation

Install the telephone base and charger(s) as shown below.

Make sure that the electrical outlet is not controlled by a wall switch.

If you subscribe to digital subscriber line (DSL) high-speed Internet service through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Contact your DSL service provider for more information about DSL filters.

Telephone wall jack

If you have DSL high speed Internet service, a DSL filter (not included) is required.

Telephone		Charger adapter
base power
adapter	Electrical outlet
	not controlled by
	a wall switch
Telephone
line cord

Telephone base Charger

•Use only the power adapters supplied with this product. To order a replacement, visit our website at www.vtechphones.com or call

1(800) 595-9511. In Canada, go to www.vtechcanada.com or call

1(800) 267-7377.

•The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling or an under-the-table/cabinet outlet.