4
Getting started
Installation options
Your telephone base is ready for tabletop use. If you want to mount yourIf you want to mount your
telephone on a wall, use the provided wall bracket to con nect with a standard
dual-stud telephone wall mounting plate. If you do n ot have this mounting
plate, you can purchase one from many hardware or consumer e lectronics
retailers. You might need a professional to install the mounti ng plate.
Tabletop to wall mount installation
Position the telephone base as shown below. Inser t the extended tabs
(marked B) of the wall bracket into the slots on the back of the telephone
base (marked B). Push the telephone base down until it is securely in plac e.
If you are using a DSL lter, plug the line cord into the lter now. Route the
telephone line cord (or DSL lter) through the wall bracket hole. Route t he
power cord out of the bottom of the telephone.
Plug the telephone line cord (or DSL lter) into the wall jack. Plug the
power adapter into a power outlet not controlled by a wall switch.
Align the holes on the bracket with the stan dard wall plate and slide the
bracket down until it locks securely. Bundle the teleph one line cord and
power adapter cord neatly with a twist tie.
1.
2.
3.
4.
1 2
34