5.5.5.1 Aggregator settings
System Priority : A value used to identify the priority between two active LACP link partners. The switch with the lowest value has the highest priority and is selected as the active LACP.
Group ID : There are seven trunk groups are supported to be configured. Choose the [Group ID] and click [Get] to get current settings. Up to 7 groups are supported.
LACP : Enable or dis able the group LACP static trunking group. If disabled, the group is local static trunking group and link aggregation is formed without LACP negotiation.
Work ports : Specify the maximal number of ports for link aggregation at the same time for the trunk group. For a static trunk group, four must be specified. For an LACP trunk group, the maximal value is two.
Member ports : Select the ports to join the trunking group. Click [Add] to add selected port into member list. Click [Remove] to remove the selected member port. Up to four ports can be selected as member ports.
Click Buttons:
[Apply] : apply the changes for the selected group ID.
[Delete] : delete the selected Group ID
