Xerox NS-2260 operation manual Create a VLAN Group, Create a Port-basedVLAN group

3.3.3.2 Create a VLAN Group

Create a Port-based VLAN group

----------------------------------------------------

	Add a VLAN Group
VLAN Name: [Vlan2		] Grp ID:[ 2 ](1~4094)
Port	Member
-----------------------
PORT1	Member
PORT2	Member
PORT3	No
PORT4	No
PORT5	No
PORT6	No
PORT7	No
PORT8	No
action-> <Quit>	<Edit>	<Save> <Previous Page> <Next Page>

------------------------------------------------------------------

Tab=Next Item BackSpace=Previous Item Quit=Previous Menu Enter= Select Item

-------------------------------------------------------------------------

New Port-based VLAN group settings:

VLAN name : Give a name to this new VLAN

Grp ID : Give an ID number to this new VLAN (Valid values 1-4094)

Member : The port specified is the member to this new VLAN.

Note:

If trunk groups exist, they are also listed after PORT26 and labeled TRK1, TRK2 .. and etc.. They also can be configured as VLAN member.