Appendix A: Factory Default Settings
IP Address Related Settings |
|
|
DHCP |
| Disabled |
Static IP Address |
| 192.168.0.2 |
Subnet Mask |
| 255.255.255.0 |
Default Gateway |
| 192.168.0.1 |
Per Port Settings |
|
|
Port Function |
| Enabled |
Auto |
| Auto |
Speed |
| 100Mbps (Port |
|
| 1000Mbps (Port G1, G2) |
Duplex |
| Full (All ports) |
Flow Control / Full |
| Enabled |
Flow Control / Half |
| Enabled |
Ingress Rate Control |
| 0 - Off |
Egress Rate Control |
| 0 - Off |
Port Security |
| Off |
Switch Unit Related Settings |
| |
User Name |
| Admin |
Password |
| 123 |
Age |
| 300 seconds |
Max. Bridge Transmit Delay Bound | Off | |
Enable Low Queue Delay Bound | Off | |
Max. Low Queue Delay Bound | 255 (2ms/unit) | |
Broadcast Storm Filtering | 25% | |
Collision Retry Forever |
| Disabled |
Hash Method |
| |
802.1x Protocol |
| Enabled |
Trunking |
| No trunk group |
IGMP |
| Enabled |
Static MAC Address |
| None |
Filter MAC Address |
| None |
Port Sniffer Function |
| Disabled |
QoS Priority Settings |
|
|
Port Priority | Disabled ( All ports ) | |
802.1p Priority Level |
| Low priority for Level 0~3 |
| High priority for Level | |
Priority Queue Service Mode All High before Low | ||
VLAN Settings |
|
|
VLAN Mode | No VLAN |
|
Port | No group (if enabled) | |
802.1Q VLAN | GVRP enabled | |
802.1Q VLAN Groups | All ports in VID=1 Vlan Name=Default | |
| Tag rule = Untag for all member ports | |
| PVID = 1, Protocol type : None | |
| Ingress Filtering Rule 1 : enabled | |
| Ingress Filtering Rule 2 : disabled | |
Spanning Tree Protocol Settings |
| |
STP Function | Disabled |
|
Bridge Priority | 32768 |
|
Bridge Max. Age | 20 |
|
Hello Time | 2 |
|
