24 The First Session
Multi-Source Mixing
In addition to the eight disc tracks, you can also connect external sound sources to the MIC/LINE inputs and mix up to eight more sound sources with the disc tracks. These extra sound sources are mixed using the CUE LEVEL and PAN controls. The [CUE MIX TO STE- REO] switch makes this possible.When this switch is in the ON position,the CUE bus signals are sent to the Stereo bus for mixing with the MIC/LINE signals.
In combination with the eight disc tracks and LINE INPUTs
The following procedure is similar to the previous mixdown procedure except that it explains how to use the CUE controls to mix the disc signals and MIC/LINE signals.
1.Make sure that all [GROUP ASSIGN] switches are off, including the MONITOR SELECT [CUE] switch.
2.Use the [FLIP] switch on each input channel to feed the disc and MIC/LINE signals to the input channel or CUE controls.
With the [FLIP] switch in the up position, the MIC/LINE input signal is fed to the input channel and the disc signal is fed to the CUE controls. With the [FLIP] switch in the down position, however, this is reversed: the MIC/LINE input signal is fed to the CUE controls and the disc signal is fed to the input channel. As the CUE controls consist of just level and pan, signals that require EQ and effects should be fed to the input channel.
1
GAIN
LINE MIC
PB MIC/ LINE
FLIP
CUE
P
A
N
L R
L
E
V
E
L
010
HIGH
MID
F
250 5k
G
LOW
AUX
1
0 10
2
010
12
GROUP ASSIGN
34
PAN
LR
ODD EVEN
10
9
8
7
6
5
4
3
2
1
0
Up (MIC/LINE)
Track 1 (disc)
Input 1 (jack/XLR)
1
GAIN
LINE MIC
PB MIC/ LINE
FLIP
CUE
P
A
N
L R
L
E
V
E
L
010
HIGH
MID
F
250 5k
G
LOW
AUX
1
0 10
2
010
12
GROUP ASSIGN
34
PAN
LR
ODD EVEN
10
9
8
7
6
5
4
3
2
1
0
Down (PB)
Input 1 (jack/XLR)
Track 1 (disc)
3.Set the PAN and CUE PAN controls on each input channel to their center positions.
