Yamaha MD8 Setting the Recording Mode, Use the Data dial to select a Recording mode, Minutes Disc

Recording a New Song 27

Setting the Recording Mode

The following table shows the four MD8 Recording modes. Songs on the same disc can be recorded in different modes, but you cannot change the mode during or after recording. These modes allow you to use disc space efficiently. Audio quality is the same for all four modes.

Rec Mode	Tracks Used	Recording Time	MD DATA	MiniDisc
		(minutes)	Disc
8TR	1, 2, 3, 4, 5,	18	O	X
	6, 7, 8
4TR	1, 2, 3, 4	37	O	X
2TR	1, 2	74	O	O
MONO	1	148	O	O

O= supported, X= not supported

Normal MiniDisc decks cannot play MD8 MD DATA discs. They can, however, play Mini- Discs containing 2TR and MONO mode songs. Also, an MD4 cannot play back 8TR data recorded on an MD8. The MD8, however, is capable of playing back MD4 4TR data. Note that you can convert an 8-track MD8 song to a 4-track song an MD4 can read. See Copying

&Converting Songs on page 62 for more information.

When using a recordable MiniDisc with the MD8, the 2TR Recording mode is selected auto- matically. For subsequent 8-track recording onto an MD DATA disc, set the Recording mode to 8TR. The Recording mode setting is stored when the MD8 is turned off.

1.To set the Recording mode, press the [UTILITY] button and use the DATA dial to select the Rec Mode function.

2.Press the [ENTER] button.

The display shows 8TR Mode (2TR Mode if you inserted a MiniDisc).

3.Use the DATA dial to select a Recording mode.

The display will indicate the number of tracks available in the selected mode (e.g.“1” when you select MONO Mode ,“1, 2” for 2TR Mode , etc.). Only the 2TR and MONO modes can be selected when a MiniDisc is loaded.

4.Press the [ENTER] button.

5.Press the [EXIT] or [UTILITY] button to exit the Rec Mode function and the Utility mode.

MD8—Owner’s Manual