Auto Punch In/Out 37
Multi Take Auto Punch In/Out
As previously mentioned, Multi Take Punch In/Out means that you can record several ver- sions of the same excerpt, audition them, decide which one you like best, and then discard the remaining Takes.You need to set the Punch In and Punch Out points for Multi Take Auto Punch In/Out (see page 32).
So long as there is enough disc space (i.e., a large enough blank area), you can record up to 99 takes.
Note: If you still have a blank track left, it may be a good idea to copy the track you want to work on before continuing (see Copying Parts on page 71). That way, you can still return to the original version after assigning one of the takes to your track.
Rehearsing Auto Punch (Multi Take)
1.Press the [REC SELECT] button (or [GROUP] + [REC SELECT]) of the track that you want to record.
A dot flashes above the corresponding track indicator.
2.Press the [AUTO PUNCH I/O] button.
3.Select the Auto Punch In mode (Multi Take) with the DATA dial and press [ENTER].
The display now reads TAKE 1 Load . Next, the
If you’re monitoring the track via CUE, you’ll hear the signal that is assigned to the selected track.
If you want to rehearse the Auto Punch In/Out repeatedly, press the [REPEAT] button. REPEAT appears on the display.
4.Press the [PLAY] button to start the Auto Punch In/Out sequence.
Playback starts and the PLAY indicators light up. The REHE indicators continue to flash, indicating Play Rehearse Wait mode.
At the specified IN point, punch in occurs (i.e., rehearsal starts). The REHE indicators stop flashing and light up continuously. The IN indicator disappears.
If you’re monitoring the track via CUE, you’ll hear the existing sounds playback until the IN point, after which you’ll hear the new sound that’s going to be recorded (we’re not record- ing anything in Rehearse mode, of course).
At the specified OUT point, punch out occurs (i.e., rehearsal stops). The REHE indicators go out and the OUT indicator disappears.
Playback continues up to the
If you pressed the [REPEAT] button in Step 2, the MD8 will rehearse the Auto Punch In/Out repeatedly until you press the [STOP] button. See the illustration on page 34 for a graphic overview of the sequence but substitute MULTI TAKE for SINGLE TAKE .
