Graphical user interface (GUI) menu

DNS Server (P) (Primary DNS server)

DNS Server (S) (Secondary DNS server)

Use this parameter to specify the IP address of the primary and secondary DNS (Domain Name System) servers.

Note

If you have only one DNS address, enter the DNS address in “DNS Server (P)”. If you have two or more DNS addresses, enter one of them in “DNS Server (P)” and another in “DNS Server (S)”.

■Network Standby (Network standby)

Use this feature to select whether this unit accepts the commands via LAN network when this unit is in the standby mode.

Choice

Descriptions

 

 

Off

Does not accept the operations via LAN

 

network when this unit is in the standby mode.

Setup (Multi Zone)

Use this menu to set the functions of the multi-zone configuration.

■Zone SP Assign

(Zone speaker assignment)

Use this feature to assign the speaker terminals for Zone 2 and Zone 3.

1Press 9k / n to select the speaker terminal and then press 9l / h repeatedly to select

the desired zone of which you want to use the speakers.

 

M

2

3

 

SP1

 

 

 

–

2

3

Zone SP Assign

SP2

 

 

On

Accepts the operations via LAN network when

Zone2 Set

OK CANCEL

this unit is in the standby mode.

Note

When “Network Standby” is set to “On”, the amount of power consumption in the standby mode increases.

■Information (Network information)

Use this feature to display the network system information.

MAC Address

(MAC (Media Access Control) address)

This information displays the MAC address that is assigned to this unit.

Status (Network status)

This information displays the current link status of the network.

Display status: 10BASE-T, 100BASE-TX, No Link, Full Duplex, Half Duplex

Note

“No Link” appears when network connection is not made.

System (System ID)

This information displays the system ID that is assigned to this unit.

 

Zone :

Zone3 Set

SP Terminal :

M: Main zone

2 : Zone 2

3 : Zone 3

2Press 9k / n to select “OK” and then press 9ENTER to confirm the setting.

y

To return to the previous menu level without change, select “CANCEL” in step 2.

■Zone2 Set/Zone3 Set (Zone 2/Zone 3 settings)

Zone2 Volume/Zone3 Volume (Zone 2/Zone 3 volume)

Use this menu to select whether this unit controls the volume level of the audio signals output at the ZONE OUT (ZONE 2 or ZONE 3) jacks.

Choice

Descriptions

 

 

Fixed

Select this setting when you want to control the

 

volume level of the selected zone on the external

 

amplifier. This unit fixes the ZONE OUT

 

(ZONE 2 or ZONE 3) volume level to a standard

 

line level.

 

 

Variable

Select this setting when you want to control the

 

volume level of the selected zone on this unit.

 

You can adjust the ZONE OUT (ZONE 2 or

 

ZONE 3) volume level simultaneously with

 

JVOLUME +/– on the remote control.

 

 

96 En