Using
■Using TRIGGER OUT jacks for Zone 2 and Zone 3
This unit is equipped with two TRIGGER OUT jacks. You can turn on and off the component corresponding to the selection of the input source of the desired zone or turning on and off the desired zone by configuring the “Trigger Output” settings (page 100).
| This unit |
| |
|
| Trigger in | |
Trigger in |
| Power amplifier (etc.) | |
1 | 2 | ||
Zone 2 (etc.) | |||
|
| ||
| TRIGGER OUT |
| |
Projector (etc.) in the |
|
| |
main zone |
|
|
After the connections, turn on this unit and set the speaker terminal assignments with “Zone SP Assign” (page 96).
Controlling Zone 2 or Zone 3You can select the zone you want to control by using the control buttons on the front panel or on the remote control.
■Basic operation
Front panel operations
1Press OZONE 2 or OZONE 3 on the front panel to individually turn on or off Zone 2 or Zone 3.
2Press OZONE CONTROLS on the front panel repeatedly to select the zone you want to control.
y
You must complete this step within 10 seconds while the selected zone flashes in the front panel display. Otherwise, the currently selected zone mode is automatically canceled.
3Perform the desired operation in the selected zone (page 120).
y
To turn off the desired zone, press OZONE 2 or OZONE 3 again.
Remote control operations
1Press HZONE repeatedly to select the zone you want to control.
“MAIN”, “ZONE 2”, or “ZONE 3” indicator appears in the display window (4) on the remote control.
(Zone 2) | (Zone 3) | (Main zone) |
OPERATION | ADVANCED |
|
|
Each time you press OZONE CONTROLS, the front panel display changes as shown below, and the indicator for the currently selected zone flashes for approximately 10 seconds. However, no indicator flashes when the main zone is selected.
ZONE2 ZONE3
2Press EPOWER to turn on the selected zone.
3Perform the desired operation in the selected zone (page 120).
y
To turn off the desired zone, press DSTANDBY.
No indicator flashes
when the main zone is selected.
ZONE2
Controls the Zone 2 amplifier or tuner functions.
ZONE3
Controls the Zone 3 amplifier or tuner functions.
English