Graphical user interface (GUI) menu

■HDMI ` HDMI (HDMI-to-HDMI video

signal processing)

Use this feature to select whether this unit processes the HDMI-to-HDMI video signals (input at HDMI input jacks and output at HDMI OUT jacks).

ChoiceFunctions

Through Select this setting when you do not want this unit to process the HDMI-to-HDMI video signals.

Processing Select this setting when you want this unit to apply the video processing configured in “Processing” to the HDMI-to-HDMI video signals.

■Processing

(HDMI video signal processing)

Use this feature to configure the resolution, aspect, and progressive re-processing settings for the video signals output at the HDMI OUT jacks.

Note

This feature is available only when “Analog ` HDMI” or “HDMI ` HDMI” is set to “Processing”.

Resolution (HDMI video signal resolution)

Use this feature to enable or disable the upscaling of the analog-to-HDMI video signals and/or HDMI-to-HDMI video signals.

This unit up-scales the video signals as follows:

•480i(576i) → 480p(576p)/720p/1080i/1080p

•480p(576p) → 720p/1080i/1080p

•720p → 1080i/1080p

•1080i → 720p/1080p

Choice

Functions

 

 

Through

Does not up-scale any video signals.

 

 

480p (or

Up-scales video signals to 480p or 576p, 1080i,

576p), 1080i,

720p, or 1080p of resolution.

720p, 1080p

 

 

 

Aspect (HDMI aspect ratio)

Use this feature to select whether this unit converts the aspect ratio of the analog-to-HDMI video signals and/or HDMI-to-HDMI video signals.

Choice

Functions

 

 

Through

Does not make any adjustments to the aspect

 

ratio for the HDMI video signal sources.

 

 

16:9 Normal

Displays video images with the aspect ratio of

 

4:3 on your video monitor with the aspect ratio

 

of 16:9. Black stripes appear on the right and

 

left sides as a result.

 

 

Smart Zoom

Fits video images with the aspect ratio of 4:3

 

to your video monitor with the aspect ratio of

 

16:9.

 

 

Notes

•If the aspect ratio of the input video source is other than 4:3, this unit automatically ignores the setting of “Aspect”.

•When “Aspect” is set to “Smart Zoom”, the video images of the edge of the video monitor are rather stretched.

Prog. Re-Processing (Progressive re-processing)

Use this feature to enable or disable the progressive reprocessing of the analog-to-HDMI video signals and/or HDMI-to-HDMI video signals.

Choice

Functions

 

 

Off

Disables the progressive re-processing of the

 

HDMI video signals.

 

 

On

Enables the progressive re-processing of the

 

HDMI video signals.

 

 

Note

This setting is effective only for video signals of which resolution is 480p(576p), 720p, or 1080p.

Setup (HDMI)

Use this feature to set the HDMI functions or check the information about the video monitors connected to the HDMI OUT jacks.

■Standby Through (Standby through)

Mode (Standby through mode)

Use this feature whether this unit allows the HDMI signals input at the HDMI IN jacks to pass thorough this unit when this unit is in the standby mode. You can also designate an HDMI IN jack and HDMI OUT jack(s) that accept the signals when “Mode” is set to “Fix” and this unit is in the standby mode.

Choice

Functions

 

 

Off

Disables the HDMI standby through feature.

 

HDMI signals do not pass through this unit if

 

this unit is in the standby mode.

 

 

Last

HDMI signals pass through this unit (only from

 

the HDMI IN jack to the HDMI OUT jack(s)

 

used when this unit is set to the standby mode)

 

even when this unit is in the standby mode.

 

 

Fix

HDMI signals pass through this unit (from the

 

HDMI IN jack specified in “Input” to the HDMI

 

OUT jack(s) specified in “Output”) even when

 

this unit is in the standby mode.

 

 

Note

When “Mode” is set to “Last” or “Fix”, the amount of power consumption in the standby mode increases.

94 En