Quick start guide

 

Step 3: Turn on the power and start

6 To set this unit to the standby mode, press

playback

BMAIN ZONE ON/OFF.

Check the type of the connected speakers.

 

If the speakers are 6-ohm speakers, set “SPEAKER

 

IMP.” to “6Ω MIN” before using this unit (page 26).

 

You can also use 4-ohm speakers as the front speakers

 

(page 121).

 

1Turn on the video monitor connected to this unit.

2Press AMASTER ON/OFF inward to the ON position on the front panel.

3Rotate the CINPUT selector to set the input source to “DVD”.

4Start playback of the desired DVD on your player.

5Rotate PVOLUME to adjust the volume.

y

For details about turning on/off this unit and the standby

 

mode, see page 26.

 

For other operations

 

• Optimizing the speaker parameters

 

 

automatically

P. 30

Basic playback operations

P. 36

Sound field programs

P. 40

Pure high-fidelity sounds

P. 47

FM/AM radio tuning

P. 48

• XM Satellite Radio tuning

P. 53

• SIRIUS Satellite Radio tuning

P. 58

Bluetooth component playback

P. 64

iPod playback

P. 66

• Playback via USB or network

P. 68

8 En