Troubleshooting

Status message

Cause

Remedy

See

page

 

 

 

 

 

 

 

Please wait

This unit is in the middle of waking up

Wait for approximately 20 seconds.

—

(Starting Server)

MCX-2000 that has been set to the

 

 

 

standby mode.

 

 

 

 

 

 

Connect error

There is a problem with the signal path

Check the connection between this unit and the LAN

23

 

from your network to this unit.

port on your router or hub.

 

 

 

 

 

 

 

Make sure your router is properly connected and

23

 

 

turned on. Also, make sure your modem is properly

 

 

 

connected and turned on when you are attempting to

 

 

 

listen to Internet Radio.

 

 

 

 

 

Disconnected

Your USB storage device or USB portable

Check the connection between this unit and your

—

 

audio player has been disconnected from

USB storage device or USB portable audio player.

 

 

the USB port of this unit.

 

 

 

 

 

 

 

The PC server or MCX-2000 previously

Connect this unit to the available PC server or MCX-

23

 

connected to this unit no longer exists.

2000.

 

 

 

 

 

No Device

There is a problem with the signal path

Turn off this unit and reconnect your USB storage

23

 

from your USB storage device or USB

device or USB portable audio player to the USB port

 

 

portable audio player to this unit.

of this unit.

 

 

 

 

 

 

 

Try resetting your USB storage device or USB

—

 

 

portable audio player.

 

 

 

 

 

Access error

This unit cannot access your USB storage

Try another USB storage device or USB portable

—

 

device or USB portable audio player.

audio player.

 

 

 

 

 

 

There is a problem with the signal path

Turn off this unit and reconnect your USB storage

23

 

from your USB storage device or USB

device or USB portable audio player to the USB port

 

 

portable audio player to this unit.

of this unit.

 

 

 

 

 

 

 

Try resetting your USB storage device or USB

—

 

 

portable audio player.

 

 

 

 

 

Unable to play

This unit cannot play back the songs

Make sure Windows Media Player 11 or Windows

—

 

currently stored on your PC.

Media Connect 2.0 is installed on your PC.

 

 

 

 

 

 

 

Check that the songs currently stored on your PC are

—

 

 

playable (MP3, WMA, MPEG-4 AAC, and WAV).

 

 

 

 

 

 

 

Store some other playable music files (MP3, WMA,

—

 

 

MPEG-4 AAC, and WAV) on your PC.

 

 

 

 

 

 

The network may be overloaded with

Try preparing a network exclusively for use with this

—

 

heavy traffic, and playback is interrupted.

unit to separate it from general network traffic.

 

 

 

 

 

List updated

The list of the contents stored on your PC

 

 

 

server or MCX-2000 has been updated.

 

 

 

 

 

 

Bookmark ON

The desired Internet Radio station has

 

 

 

been added to the “Bookmarks” list.

 

 

 

 

 

 

Bookmark OFF

The stored Internet Radio station has been

 

 

 

removed from the “Bookmarks” list.

 

 

 

 

 

 

Empty Memory!

No items are assigned to the selected

Assign the desired item to the numeric button.

72

 

numeric button.

 

 

 

 

 

 

Not found!

This unit cannot find the assigned item for

Connect the USB device that stores the preset item.

—

 

the selected numeric button.

 

 

 

Turn on the PC or MCX-2000.

—

 

 

 

 

 

 

 

 

Try again when the selected Internet Radio is

73

 

 

providing the service.

 

 

 

 

 

 

 

Preset the desired item to the numeric button (1-8) again.

72

 

 

 

 

USB Overloaded

Over current passes through the connected

Turn off this unit and then disconnect the USB

—

 

USB device.

device. If the message appears when you connect the

 

 

 

USB device again, this unit may not compatible with

 

 

 

the USB device.

 

 

 

 

 

134 En