Yamaha RX-V3900 38 En, Using your headphones, Muting the audio output, Displaying the input source information, ■Audio information

Playback

Using your headphones

Connect a pair of headphones with a stereo analog audio cable plug to the PHONES jack on the front panel.

PURE DIRECT

VOLUME

INPUT
MAIN ZONE					ZONE ON/OFF	ZONE CONTROLS
MAIN ZONE			MULTI ZONE
					ZONE 2 ZONE 3
ON/OFF	YPAO	SILENT CINEMA	S VIDEO	VIDEO	L AUDIO R	OPTICAL
PROGRAM	OPTIMIZER
	MIC	PHONES			VIDEO AUX	USB

OFF

MASTER

When you select a sound field program, SILENT CINEMA mode activates automatically (page 45).

Notes

•When you connect headphones, no signals are output at the speaker terminals.

•All digital multi-channel audio signals are mixed down to the left and right headphone channels.

•When “MULTI CH” is selected as the input source, only the signals input at the MULTI CH INPUT FRONT jacks are output.

Muting the audio output

Press LMUTE on the remote control to mute the audio output. Press LMUTE again to resume the audio output.

•The VOLUME level indicator flashes while the mute function is on.

•You can configure the muting level with “Muting Type” (page 90).

Displaying the input source information

You can display the format, sampling frequency, channel, bit rate and flag data of the current input signal.

1Set the operation mode selector to FAMP and then press 8STATUS on the remote

control.

The input source information screen appears in the GUI screen.

2Press 9l / h to toggle between the audio and video information.

3Press 8STATUS on the remote control again to exit from the input source information screen.

■Audio information

Format	Signal format. When this unit cannot detect a
	digital signal, it automatically switches to
	analog input.

Sampling	The number of samples per second taken from
	a continuous signal to make a discrete signal.

Channel	The number of source channels in the input
	signal (front/surround/LFE). For example, a
	multi-channel soundtrack with 3 front
	channels, 2 surround channels and LFE, is
	displayed as “3/2/0.1”.

Bitrate	The number of bits passing a given point per
	second.

Dialogue	The dialogue normalization level preset to the
	current input bitstream signal.

Flag1/Flag2	Flag data encoded in the bitstream, or PCM
	signals that cue this unit to automatically
	switch decoders.

Notes

•“–––” appears when this unit cannot display the corresponding information.

•Some high definition audio bitstream contents may not include the discrete surround back left and right channel signals but are encoded at the bitrate of 192 kHz.

•Even if you make settings to output bitstreams directly, some players convert the Dolby TrueHD or Dolby Digital Plus bitstreams to the Dolby Digital bitstreams, while converting the DTS-HD Master Audio or DTS-HD High Resolution Audio bitstreams to the DTS bitstreams.