Yamaha RX-V3900 87 En, Music Content, Setup (Speaker), ■Connect (Bluetooth connection), ■Configuration (Speaker configurations)

4Press 9l to return to the previous menu level.

Note

If the connected Bluetooth receiver cannot find any Bluetooth components, “Not found” appears.

■Connect (Bluetooth connection)

Use this feature to establish a connection between the Yamaha Bluetooth wireless audio receiver (such as YBA- 10, sold separately) and your Bluetooth component.

Note

Pairing must be performed when using a Bluetooth component with the Bluetooth receiver connected to this unit for the first time of if the pairing data has been deleted.

Press 9ENTER to establish a connection.

The connected Bluetooth receiver starts searching Bluetooth components. Once the connection is established successfully, “BT Connected” appears.

Note

If the connected Bluetooth receiver cannot find any Bluetooth components, “Not found” appears.

y

To terminate the connection, press 9ENTER again.

Music Content

Use this feature to browse the music contents of iPod, USB component, PC/MusicCAST, Internet radio and Rhapsody® (U.S.A. model only). See the following pages for details.

•iPod (page 66)

•USB (page 68)

•PC/MCX (page 68)

•NET RADIO (page 68)

•Rhapsody (page 68)

Graphical user interface (GUI) menu

Setup (Speaker)

Use this feature to manually adjust the basic speaker settings. Most of the “Speaker” parameters are set automatically when you run the automatic setup.

y

•Set “Test Tone” to “On” to output the test tone for the “Configuration”, “Distance” and “Level” settings.

•If your subwoofer can adjust the output volume and the crossover frequency, set the volume to about half way (or slightly less) and set the crossover frequency to the maximum.

■Configuration (Speaker configurations)

Measure for the speaker size

The woofer section of a speaker is

–16 cm (6.5 in) or larger: large

–smaller than 16 cm (6.5 in): small

Front (Front speakers)

Choice	Descriptions
Large	Select this setting when the front speakers
	are large.
Small	Select this setting when the front speakers
	are small.

Note

When “Bass Out” is set to “Front” (page 88), you can select only “Large” in “Front”. If the value of “Front” is set to other than “Large” in advance, this unit change the value to “Large” automatically.

Center (Center speaker)

Choice	Descriptions
Large	Select this setting when the center speaker is
	large.
Small	Select this setting when the center speaker is
	small.
None	Select this setting when you do not use the
	center speaker. The center channel signals
	are directed to the front left and right
	speakers.
Surround (Surround left/right speakers)

Choice	Descriptions
Large	Select this setting when the surround
	speakers are large.
Small	Select this setting when the surround
	speakers are small.
None	Select this setting when you do not use the
	surround speakers. This unit is set to the
	Virtual CINEMA DSP mode (page 45), and
	“Surround Back” is automatically set to
	“None”.

OPERATION ADVANCED

English

87 En