Advanced setup
Press GID repeatedly using a ballpoint pen or similar object on the remote control to select the desired remote control ID.
Each time you press GID, the remote control ID indicator changes as shown below.
ID1
ID
ID2
y
To set the remote control ID of the simplified remote control, see page 116 for details.
■SIRIUS Satellite Radio Parental Lock code number reset SIRIUS PIN
(U.S.A. and Canada models only)
Use this feature to set the code number for the SIRIUS Satellite Radio Parental Lock feature to the initial factory setting.
ChoiceDescriptions
RESET | Sets the code number to the initial factory setting. |
CANCEL Cancels the reset of the code number.
■Tuner frequency step TUNER FRQ STEP
(Asia and General models only)
Use this feature to set the tuner frequency step according to the frequency spacing in your area.
Choice | Descriptions |
|
|
AM10/ | Select this setting for North, Central and South |
FM100 | America. |
|
|
AM9/FM50 | Select this setting for all other countries. |
|
|
■Bi-amplifier mode BI-AMP
Use this feature to activate or deactivate the
Choice | Descriptions |
|
|
ON | Select this setting if you want to activate the bi- |
| amplifier function. |
|
|
OFF | Select this setting if you want to deactivate the bi- |
| amplifier function. |
|
|
Note
When
■Recovery and backup of the system
settings RECOV./BACKUP
Use this feature to save and restore the settings of this unit.
ChoiceDescriptions
RECOVERY Restoring the saved setting of this unit.
BACKUP Saves the current settings of this unit.
CANCEL Cancels the recovery or backup of the settings of this unit.
Notes
•This unit does not save the FM/AM preset stations, preset USB/ network items, and system memory settings.
•If no settings are saved, you cannot select “RECOVERY”.
■Parameter initialization INITIALIZE
Use this feature to reset the parameters of this unit to the initial factory settings. You can select the category of parameters to be initialized.
Choice | Descriptions |
|
|
DSP | Select this setting to initialize all the parameters of |
PARAM | the sound field parameters (page 80). |
|
|
VIDEO | Select this setting to initialize all the parameters in |
| “Video” and “Display Set” (except “Short |
| Message” and “Playback Screen”). |
|
|
NETWORK | Select this setting to initialize all the parameters in |
| “Network” and MusicCAST information stored in |
| this unit. |
|
|
ALL | Select this setting to initialize all the parameters of |
| this unit. |
|
|
CANCEL | Select this setting to cancel the initialization |
| procedure. |
|
|
y
To initialize the parameters of each sound field program, use “Initialize” in “Stereo/Surround” (page 84).
■ MAC address filter MAC FILTER
Use this feature to filter the access to this unit via LAN to control this unit by the MAC address of the accessing PC (page 105).
Choice | Descriptions |
|
|
ON | Only allows to accept the access from the PC |
| whose MAC address is registered to this unit. |
|
|
OFF | Allows to accept the access from any PC. |
|
|
y
You can register the MAC address that is allowed to access when “MAC FILTER” is set to “ON” by using the Web browser (page 105).