Connections
nTuner indicators
Light up when this unit is in the FM, AM, XM Satellite Radio, or SIRIUS Satellite Radio tuning mode.
Note
The HD and TAG indicators are only applicable to the U.S.A. model and used when this unit is tuned into the HD Radio reception band.
oMenu browsing indicator
Lights up if any items exist under the current item during menu browsing for iPod, etc.
pSLEEP indicator
Lights up while the sleep timer is on (page 39).
qVOLUME level indicator
•Indicates the current volume level.
•Flashes while the mute function is on (page 38).
rInput channel and speaker indicators
Presence speaker indicators
L C R
SL LFE SR | Input channel indicators |
SBL SB SBR
Input channel indicators
•Indicate the channel components of the current digital input signal.
•Light up or flash according to the settings of the speakers when this unit is in the automatic setup procedure (page 30).
Presence speaker indicators
Light up according to setting for “Front Presence” (page 88) in “Configuration” when this unit is in the auto setup procedure (page 30) or the speaker level setting procedure in the “Level” (page 89).
sZONE2/ZONE3 indicators
Lights up when Zone 2 or Zone 3 is turned on (page 119).
The remote control transmits a directional infrared ray. Be sure to aim the remote control directly at the remote control sensor on this unit during operation.
Remote control sensor
Approximately 6 m (20 ft) | 30 | 30 |
|
6LIGHT
Lights up the remote control buttons and the display window (4).
Display window (4)
[1][2]
[3][4]
[1]ID1/ID2 indicator
Indicates the currently selected remote control ID (page 121).
[2] Transmit indicator
Appears while the remote control is sending infrared signals.
[3] Zone indicators
Indicates the currently controlling zone (page 119).
[4] Information display
Shows the name of the selected input source that you can control.
Infrared window (1)
Outputs infrared control signals. Aim this window at the component you want to operate.