PEQ Select (Parametric equalizer type select)
Use this feature to select the parametric equalizer type that applied to the results of the automatic setup. page 35 for the descriptions of each parametric equalizer type.
Choice | Descriptions |
|
|
Manual | Applies the manually configured parametric |
| equalizer in “Setup”. |
|
|
Flat | Applies the “Flat” type parametric equalizer. |
|
|
Front | Applies the “Front” type parametric |
| equalizer. |
|
|
Natural | Applies the “Natural” type parametric |
| equalizer. |
Graphical user interface (GUI) menu
Test Tone
Use this feature to select whether to turn on or off the test tone output while you are adjusting the tonal quality of each speaker.
Choice | Functions |
|
|
On | Outputs the test tone. |
|
|
Off | Does not output the test tone. |
|
|
2Press 9h to access the settings window.
PEQ Data Copy | PARAM RESET |
Through | Does not use the parametric equalizer. |
|
|
Notes
• When you carry out the automatic setup, this unit automatically |
set “PEQ Select” to “Natural”. |
• “Level” settings (page 89) also change corresponding to the |
setting of “PEQ Select”. |
PEQ Select
Front L
Front R
Center
EDIT EXIT
Band / Gain
• This unit does not change the configurations of “Manual” even |
if you perform the automatic setup. |
Manual parametric equalizer configuration of each speaker
Use this feature to adjust the tonal quality of each speaker. You can copy the results of the automatic setup for the base of the manual configuration by using “PEQ Data Copy”. Set “PEQ Select” to “Manual” in advance.
1Press 9k / n / l / h to select “Test Tone” or the speaker you want to adjust.
Choice | Adjusted speaker |
|
|
Front L | Front left speaker |
|
|
Front R | Front right speaker |
|
|
Center | Center speaker |
|
|
Surround L | Surround left speaker |
|
|
Surround R | Surround right speaker |
|
|
Surround Back L | Surround back left speaker |
|
|
Surround Back R | Surround back right speaker |
|
|
Front Presence L | Front presence left speaker |
|
|
Front Presence R | Front presence right speaker |
|
|
Subwoofer | Subwoofer |
|
|
3Press 9k / n / l / h to select “PARAM” and then press 9ENTER repeatedly to select a
parameter from “Band” (band), “Freq.” (frequency) or “Q” (Q factor).
y
You can adjust “Gain” (gain) with any parameter.
4Press 9n to select “EDIT” and press 9ENTER to access the edit window.
For more information on the parametric equalizer and each parameter, see page 144.
PEQ Data Copy | Band | #1 |
PEQ Select | Gain | 0.0dB |
Freq | 62.5Hz | |
Front L | Q | 1.000 |
|
| |
Front R |
|
|
Center |
|
|
| Exit:ENTER | |
The parameter selected in “PARAM” is highlighted.
•Press 9l / h to adjust the parameter.
•Press 9k / n to adjust the “Gain”.
•Press 9ENTER to exit the edit window.
y
•When you select “Band” in step 3, you can use this menu as a graphic equalizer.
•“Band #5”, “Band #6”, and “Band #7” can adjust the frequencies of above 500 Hz.
•When you select “Subwoofer” in step 1 and “Band” in step 3, you can adjust “Band #1”, “Band #2”, “Band #3” and “Band #4” only. In this case, “Band #1”, “Band #2”, “Band #3” and “Band #4” adjust the frequencies of below 200 Hz.
OPERATION | ADVANCED |
|
|
English