Remote control features

Simplified remote control

Use the supplied simplified remote control to make basic controls of this unit.

STANDBY

Sets the selected zone to the standby mode.

☞ P. 26, 119

SYSTEM MEMORY

Save or recall the system settings.

☞ P. 101

These buttons function as well as the following identical buttons on the main remote control (when the operation selector mode is set to FAMP).

8STATUS

9k / n / l / h

9ENTER

0RETURN, SUBMENU IMENU KDISPLAY

 

 

POWER

STANDBY

POWER

Turn on the power.

☞ P. 26, 119

SYSTEM MEMORY

1

2

3

4

INPUTl / h

Select the input source.

☞ P. 36

INPUT

 

 

 

VOLUME

STATUS

 

MENU

VOLUME +/–

 

 

 

 

 

 

Adjust the volume level.

 

ENTER

 

☞ P. 36

 

 

 

RETURNDISPLAY

SUBMENUMUTE

MUTE

Mutes the audio output.

☞ P. 38

Remove the insulation sheet before using the remote control.

■Setting the controlling zone of the

simplified remote control

Use this feature to set the controlling zone (page 119) and remote control ID (page 121) of the simplified remote control.

Setting the remote control ID

•ID1: Press and hold l (left cursor) and 1 for 3 seconds.

•ID2: Press and hold l (left cursor) and 2 for 3 seconds.

Setting the controlling zone

•Main zone: Press and hold h(right cursor) and 1 for 3 seconds.

•Zone 2: Press and hold h (right cursor) and 2 for 3 seconds.

•Zone 3: Press and hold h (right cursor) and 3 for 3 seconds.

■Replacing the battery in the simplified

remote control

Change the battery when the operation range of the simplified remote control decreases.

Use a straight

Replace the

Close the

pin to remove

battery with a

cover.

the cover.

new CR2025

 

 

battery.

 

Notes

•Insert the battery according to the polarity markings (+ and –).

•If the batteries run out, immediately remove them from the simplified remote control to prevent an explosion or acid leak.

•If a battery starts leaking, dispose of it immediately. Be careful not to let the leaking battery acid touch your skin or clothing.

•Before inserting new batteries, wipe the compartment clean.

•Dispose of batteries according to your regional regulations.

116 En