Before performing the following operations, set the operation mode selector on the remote control to FSOURCE and then press 3TUNER.

Preset FM/AM stations

Use this feature to store up to 40 stations FM/AM stations (A1 to E8: 8 preset station numbers in each of the 5 preset station groups). Preset the desired stations to this unit by using the automatic or manual station preset.

■Automatic station preset

You can use the automatic preset tuning feature to store up to 40 FM stations with strong signals in order.

(U.S.A. model only)

You can use the automatic preset tuning feature to store up to 40 AM HD Radio, FM HD Radio, and analog FM radio stations with strong signals.

(U.S.A. model only)

1Press JBAND (or 8BAND) to select the desired reception band.

This unit searches the stations in the selected band and then another band.

2Press and hold JBAND (or 8BAND) for more than 3 seconds.

The MEMORY indicator flashes and “AUTO MEMORY” appears in the front panel display. After approximately 5 seconds, automatic presetting starts from the current frequency and proceeds toward higher frequencies.

Flashes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A 1 F M 8 8 . 9 M H z

MEMORY

 

 

A U T O M E M O R Y

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Flashes

When automatic preset tuning is completed, the MEMORY indicator disappears.

y

•To specify the preset group and number from which this unit stores stations, press FPRESET/TUNING/CH l / h (or

9CAT./A-El / h and 9PRESET/CH k / n) repeatedly after you perform step 2.

•To cancel the automatic station preset, press JBAND (or 8BAND) again.

FM/AM tuning

•(U.S.A. model only)

When this unit stores the FM HD Radio stations with this feature, this unit stores only the main audio program of the stations (HD1). When you want to store the sub-audio programs of the FM HD Radio stations, preset the stations manually.

■Manual station preset

Use this feature to store the FM or AM stations manually.

(U.S.A. model only)

You can store the analog FM/AM radio stations and FM/ AM HD Radio stations manually, and you can also store the sub-audio programs of FM HD Radio station.

1Tune into a station.

See page 48 for tuning instructions.

y

(U.S.A. model only)

To store a sub-audio program of the HD Radio station (HD2 to HD8), press APRG SELECT b / a

repeatedly to select the desired audio program (page 51).

2Press GMEMORY (or 0MEMORY).

The PRESET indicator lights up in the front panel and this unit automatically selects an empty preset number.

Lights up

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PRESET M E M O R Y A

1

 

 

 

 

 

F M 8 8

. 9 M H z

 

 

 

 

 

 

 

y

•To store the selected station under an empty preset number

automatically, press and hold GMEMORY (or

0MEMORY) for more than 2 seconds instead of step 2. In this case, the following steps are unnecessary.

•To cancel the manual station preset, press GMEMORY (or 0MEMORY) again.

3To select the preset group and number (A1 to E8), press FPRESET/TUNING/CH l / h (or 9CAT./A-El/ hand 9PRESET/CH k/ n) repeatedly.

•To select a higher preset station group and number, press Fh (or 9k).

•To select a lower preset station group and number, press Fl (or 9n).

Preset station group and number

OPERATION

BASIC

 

 

Notes

•Any stored station data existing under a preset station number is cleared when you store a new station under the same preset station number.

•If the number of received stations does not reach 40 (E8), automatic preset tuning automatically stops after searching for all the available stations.

PRESET M E M O R Y C

2

F M 8 8

. 9 M H z

English

49 En